No image available
Other Products ｜Ara IN30TN Instantaneous Inline Water Heater 3.0 kW Thermostatic
USD 67.10
Other Products / General Merchandise / Other Products
Compact and easy to install, the Ara is an effective, low cost solution for washrooms and other point-of-use applications where only a small hot water demand is required. Please check the flow rate and temperature performance data to ensure the Ara is suitable for your application (see downloads section below).
Supplied with a 1.6 l/min flow restrictor which must be fitted to the tap spout giving a temperature uplift of 27°C
This would give 42°C in summer, incoming water temp 15°C and 37°C in winter, incoming water temp 10°C
Temperature factory set at 38°C and can be adjusted by the user between 35°C and 50°C. In normal usage the maximum temperature is 37°C to 42°C
Must be used with a spray head tap
Not suitable for use with thermostatic mixing valves or taps or to supply a single lever mixer tap
Application
Ara Instantaneous Water Heaters are intended for use with spray head taps with removable M22/M24 nozzles. A tap spray nozzle must be fitted in the tap to control the water flow rate and to provide best performance and energy and water efficiency.
Selection Guide
Take into account that the incoming water supply temperature will be lower in the winter than summer
The incoming water temperature can fluctuate dependent on time of year in the UK. Winter may result in incoming temperatures below 10°C, whereas summer water temperatures can be upwards of 15°C. It is imperative this is taken into account.
For example the heater could deliver 42°C water in the summer (with an incoming water supply temperature of 15°C). The same product with the same flow rate would only be able to deliver 37°C in winter (due to a lower incoming water temperature of 10°C). The delivered temperature will be even lower if the incoming water supply temperature is less than 10°C.
Check the flow rate and water temperature will be adequate for your application using the chart and tables provided below in the downloads section.
Brand:HycoSKU:IN30TNTags:Pricefy
View productSupplied with a 1.6 l/min flow restrictor which must be fitted to the tap spout giving a temperature uplift of 27°C
This would give 42°C in summer, incoming water temp 15°C and 37°C in winter, incoming water temp 10°C
Temperature factory set at 38°C and can be adjusted by the user between 35°C and 50°C. In normal usage the maximum temperature is 37°C to 42°C
Must be used with a spray head tap
Not suitable for use with thermostatic mixing valves or taps or to supply a single lever mixer tap
Application
Ara Instantaneous Water Heaters are intended for use with spray head taps with removable M22/M24 nozzles. A tap spray nozzle must be fitted in the tap to control the water flow rate and to provide best performance and energy and water efficiency.
Selection Guide
Take into account that the incoming water supply temperature will be lower in the winter than summer
The incoming water temperature can fluctuate dependent on time of year in the UK. Winter may result in incoming temperatures below 10°C, whereas summer water temperatures can be upwards of 15°C. It is imperative this is taken into account.
For example the heater could deliver 42°C water in the summer (with an incoming water supply temperature of 15°C). The same product with the same flow rate would only be able to deliver 37°C in winter (due to a lower incoming water temperature of 10°C). The delivered temperature will be even lower if the incoming water supply temperature is less than 10°C.
Check the flow rate and water temperature will be adequate for your application using the chart and tables provided below in the downloads section.
Brand:HycoSKU:IN30TNTags:Pricefy
Product details
Compact and easy to install, the Ara is an effective, low cost solution for washrooms and other point-of-use applications where only a small hot water demand is required. Please check the flow rate and temperature performance data to ensure the Ara is suitable for your application (see downloads section below).
Supplied with a 1.6 l/min flow restrictor which must be fitted to the tap spout giving a temperature uplift of 27°C
This would give 42°C in summer, incoming water temp 15°C and 37°C in winter, incoming water temp 10°C
Temperature factory set at 38°C and can be adjusted by the user between 35°C and 50°C. In normal usage the maximum temperature is 37°C to 42°C
Must be used with a spray head tap
Not suitable for use with thermostatic mixing valves or taps or to supply a single lever mixer tap
Application
Ara Instantaneous Water Heaters are intended for use with spray head taps with removable M22/M24 nozzles. A tap spray nozzle must be fitted in the tap to control the water flow rate and to provide best performance and energy and water efficiency.
Selection Guide
Take into account that the incoming water supply temperature will be lower in the winter than summer
The incoming water temperature can fluctuate dependent on time of year in the UK. Winter may result in incoming temperatures below 10°C, whereas summer water temperatures can be upwards of 15°C. It is imperative this is taken into account.
For example the heater could deliver 42°C water in the summer (with an incoming water supply temperature of 15°C). The same product with the same flow rate would only be able to deliver 37°C in winter (due to a lower incoming water temperature of 10°C). The delivered temperature will be even lower if the incoming water supply temperature is less than 10°C.
Check the flow rate and water temperature will be adequate for your application using the chart and tables provided below in the downloads section.
Brand:HycoSKU:IN30TNTags:Pricefy
Supplied with a 1.6 l/min flow restrictor which must be fitted to the tap spout giving a temperature uplift of 27°C
This would give 42°C in summer, incoming water temp 15°C and 37°C in winter, incoming water temp 10°C
Temperature factory set at 38°C and can be adjusted by the user between 35°C and 50°C. In normal usage the maximum temperature is 37°C to 42°C
Must be used with a spray head tap
Not suitable for use with thermostatic mixing valves or taps or to supply a single lever mixer tap
Application
Ara Instantaneous Water Heaters are intended for use with spray head taps with removable M22/M24 nozzles. A tap spray nozzle must be fitted in the tap to control the water flow rate and to provide best performance and energy and water efficiency.
Selection Guide
Take into account that the incoming water supply temperature will be lower in the winter than summer
The incoming water temperature can fluctuate dependent on time of year in the UK. Winter may result in incoming temperatures below 10°C, whereas summer water temperatures can be upwards of 15°C. It is imperative this is taken into account.
For example the heater could deliver 42°C water in the summer (with an incoming water supply temperature of 15°C). The same product with the same flow rate would only be able to deliver 37°C in winter (due to a lower incoming water temperature of 10°C). The delivered temperature will be even lower if the incoming water supply temperature is less than 10°C.
Check the flow rate and water temperature will be adequate for your application using the chart and tables provided below in the downloads section.
Brand:HycoSKU:IN30TNTags:Pricefy
Product information
COL-ef9e6625ae360458b4e60319e68473607f804f96
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
![SaltStick Caps [30ct Bottle]｜ Fashion Accessories](https://cdn.shopify.com/s/files/1/0878/6811/3205/files/Saltcaps30ct_1.png)
